How to Clear Information on Inserted CDs and DVDs August 18, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Software Issue, Windows 7, Windows Vista, Windows XP.add a comment
This post provide windows media player support to Prevent possible privacy violations by regularly clearing the Windows Media Player 10 cache information.
Windows Media Player 10 automatically stores information about CDs and DVDs that you insert into your machine, as well as some information about devices that you connect to your machine, such as digital audio players.
This information is kept in a cache for a variety of reasons. For example, when playing a CD on your computer with Windows Media Player, information about the CD, including album art, is displayed. If you happen to be offline when you replay the CD, since the information is in a cache, Windows Media Player can go ahead and show the album information.
While this cache information can be convenient, it can also be a privacy violation. If other people access your PC, it is possible for them to get information about the CDs and DVDs you view, plus information about the multimedia devices you have hooked up to your computer. Thus, if you want to delete this cache: Below given some technical support tips to delete Chache of Media player 10
1. Right-click on the Windows Media Player 10 title bar, choosing “Tools” – “Options”.
2. When the “Options” multi-tabbed dialog box appears, select the “Privacy” tab.
3. Underneath “History”, click “Clear Caches”.
4. Click “OK” to close the dialog box.
Note that depending on your needs, you may wish to clear this cache on a regular basis.
How to remove and replace an internal hard disk July 30, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Windows 7, Windows Vista, Windows XP.2 comments
This post provide technical support to remove or repalce an internal hard disk from your computer, to add or remove hard disk follow the given below three steps:
1.Turn off your computer, disconnect the power, and remove your computer’s cover. If you have a laptop, check the information from the manufacturer to find out if there is a panel you can remove to access the hard disk.
2.Unplug all cables connected to the hard disk, and then remove the hard disk. Pay attention to which cables you unplug, since you will plug the same cables into the new hard disk. If there are any screws holding in the hard disk, you’ll need a small screwdriver to unscrew them. Many hard disks slide in and out of the case on rails. If you have questions, check the information that came with your computer.
3.Insert the new hard disk and connect it to the same cables that are in the same places as the hard disk you removed. One cable connects the disk to the computer’s power supply, and the other cable connects the disk to the computer’s motherboard.
How do I Recover Deleted Files? July 21, 2009
Posted by computerhelpandsupport in CPU Problems, Computer Help, Operating System, Windows 7, Windows Vista, Windows XP.Tags: computer technical support, data backup support, Fix Computer Problems, recover deleted file
1 comment so far
This post provide computer technical support to recover deleted files from recyclebin and recover with file recovery program.You’re probably looking to better deleted files from your hard drive because you deleted a file you shouldn’t have. Don’t worry, at one time or added we’ve every needed to better deleted files from our computers.
Lucky for every of us there are some established ways to better deleted files that are usually very effective, so don’t lose wish yet!
Answer: You crapper better deleted files by restoring the deleted files from the Recycle Bin or you haw be healthy to better deleted files using a file feat program.
Even though I list two ways to better deleted files, it’s more of a troubleshooting process than a choice.
The Recycle Bin should be the first locate you countenance to better deleted files. A file feat information should be used to better deleted files only if the files have been emptied from the Recycle Bin.
Here’s the method you should use to better deleted files:
1. Recover Deleted Files From the Recycle Bin. If you haven’t yet emptied the Recycle Bin, your deleted files will still be settled here. You crapper better deleted files from the Recycle Bin by only restoring the files to their original locations
2. Recover Deleted Files with a Free File Recovery Program. If the files you’re looking for have already been emptied from the Recycle Bin, you crapper attempt to better them using a file feat program.
Important: You won’t always be healthy to better deleted files after they’ve left the Recycle Bin but a liberated file feat information is your best bet at this point. You crapper improve the ability of a file feat information to better deleted files by installing and streaming the information as soon as possible after deleting a file.
How to install or change a video driver July 15, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Software Issue, Windows 7, Windows Vista, Windows XP.1 comment so far
This post describes how to install or change a video driver in Microsoft Windows 95, Microsoft Windows 98, or Microsoft Windows Millennium Edition.To install or change a video driver, use the method for your version of Microsoft Windows. This contain step by step computer support instruction to install video driver.
Windows 98 or Windows Millennium Edition
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Click Advanced.
5. On the Adapter tab, click Change.
6. Click Next.
7. Use one of the following methods to locate the installation files for the new video driver.
Method 1: Search for the new driver
1. Click Search for a better driver than the one your device is using now. (Recommended), and then click Next.
2. If the new driver is located on a floppy disk, insert the disk into the floppy disk drive, and then click to select the Floppy disk drives check box.
If the new driver is located on a CD-ROM, insert the CD-ROM into the CD-ROM or DVD-ROM drive, and then click to select the CD-ROM drive check box.
To check the Microsoft Windows Update Web site for an updated version of the driver, click to select the Microsoft Windows Update check box.
If you downloaded the video driver to a folder on your hard disk, or if the updated video driver is located in a share on your network, click to select the Specify a location check box, and then type the path to the updated driver in the text box.
3. Click Next.
4. To install the recommended video driver, click The updated driver (Recommended).
To install a different video driver that is compatible with your video adapter, click Install one of the other drivers, click View List, click the video driver that you want to use in the list of video drivers, and then click OK.
Method 2: Specify the location of the new driver
1. Click Display a list of all the drivers in a specific location, so you can select the driver you want, and then click Next.
2. In the Models box, click the model name of your video adapter.
To install a different video driver, click Show all hardware, click the appropriate manufacturer in the Manufacturers box, and then click the appropriate model in the Models box.
8. Click Next, and then click Next again.
9. Click Finish.
10. Click Close, and then click Close again.
11. When you are prompted to restart the computer, click Yes.
Windows 95
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Click Change Display Type or Advanced Properties.
5. Under Adapter Type or on the Adapter tab, click Change.
6. In the Models box, click the model name of your video adapter.
To install a different video driver, click Show all hardware, click the appropriate manufacturer in the Manufacturers box, and then click the appropriate model in the Models box.
To install a manufacturer-supplied driver, click Have Disk, and then follow the instructions on the screen to install the driver from the disk.
7. Click OK, click Close, and then click Close again.
8. When you are prompted to restart the computer, click Yes.
How to troubleshoot audio issue in streaming videos June 11, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Software Issue, Windows Vista, Windows XP.1 comment so far
This post describes how to troubleshoot audio issues in streaming videos.Some time you installed audio and video driver, but it not work properally, This post provide computer troubleshooting tips for fix this problems.
Follow the Steps
Click ‘Start’.
Select ‘Run’.
Type: sndvol32
Click OK’.
Make sure the following are not muted and the volume is up for ‘Volume Control’ and ‘Wave’.
Make sure you have your sound card selected as the Default device:
Click ‘Start’.
Select ‘Control Panel’.
Open the ‘Sound and Audio Devices’ icon.
Click the ‘Audio’ Tab.
Under ‘Sound playback’ set the Default device to your sound card not your webcam/modem.
Click ‘OK’
If you’re still having trouble, check to see if your system meets these requirements for running the video player:
Fix Memory Parity Errors May 27, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Windows 7, Windows Vista, Windows XP.1 comment so far
This post discusses the extensive study in determining the causes of some NMI memory parity errors in Windows with the aid of a high tech SIMM tester. The results are not conclusive, and the research into this is ongoing.
Both IBM OS/2 2.x and Windows seem to experience problems that appear to be associated with system memory in some circumstances. It can be frustrating to have a system that is able to run DOS, Windows 3.1, or OS/2 1.x and suddenly find it cannot run Windows due to this problem. The first issue to clear up is that not all NMI errors are due to memory. Other boards in the system can cause this problem, and components directly on the system motherboard can be at fault.
The memory is not functioning at the specified access rate as required by the system board. If the system specification calls for 80 ns access rate, Windows most likely fails if memory is accessing at a slower rate such as 90 ns. Even though the chips may be marked as 80 ns, in testing, some fail to meet this access rate. Quite often memory chips run at a slower speed when they reach operating temperature. This produces an effect called “speed drift.” The symptoms are a system which runs Windows when first turned on; however, after 15 minutes or so, the system starts having memory errors. A high quality SIMM tester can cycle the chips through various voltage and heat cycles, so this is fairly easy to see.
The memory is not functioning at the specified access rate as required by the system board. If the system specification calls for 80 ns access rate, Windows most likely fails if memory is accessing at a slower rate such as 90 ns. Even though the chips may be marked as 80 ns, in testing, some fail to meet this access rate. Quite often memory chips run at a slower speed when they reach operating temperature. This produces an effect called “speed drift.” The symptoms are a system which runs Windows when first turned on; however, after 15 minutes or so, the system starts having memory errors. A high quality SIMM tester can cycle the chips through various voltage and heat cycles, so this is fairly easy to see.
To fix this memory Parity Errors Simply follow this Computer Support Services
Related Search
Fix XP Memory Dump File Error
Install standard VGA compatible driver
How to Troubleshoot Display Problem in Windows XP
How to Troubleshooting Windows Defender
How to Troubleshooting Windows Defender May 14, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Windows Vista, Windows XP.7 comments
Some time your windows Defender currupted and you need to update. This post provide Technical support to troubleshoot your windows defender
Windows Defender is a new security program that helps to protect your PC from spyware and other unwanted software. This program works on Windows XP & Vista. You may encounter various issues with the Microsoft Windows Defender application. This post explains you the various issues with the Computer troubleshooting procedures.
Unable to Start Windows Defender program in Windows XP:
At the startup of Windows XP, you may see an error that says “Unable to Start Windows Defender service”. This issue occurs, if some of the registry entries are corrupted. Restarting the service from the service console may also prompt the same error.
To resolve this issue, you may need to uninstall and reinstall the Windows Defender. Follow the below mentioned steps:
1. Click Start, Control Panel.
2. Click Add or Remove Programs.
3. Click Windows Defender, and click Remove.
This will uninstall Windows Defender. You can download and reinstall the updated version from the following link:
http://www.microsoft.com/athome/security/spyware/software
Unable to Uninstall Windows Defender in XP:
This issue happens due to corrupted DLL library. To resolve this error, download and run the Microsoft Installer Cleanup Utility. Download it from the following link:
http://support.microsoft.com/kb/290301/
You can also try uninstalling the Windows Defender program by running the uninstall command option from Run.
Click Start, Type Run, and type the following:
msiexec /uninstall windowsdefender.msi /quiet /log uninstall.log
NOTE: This method only works in Windows XP and is not applicable for Windows Vista.
Troubleshooting Code Errors with Windows Defender program:
While updating the definitions of Windows Defender automatically, you may experience different code errors. This is due to some setting in Windows update. Follow the steps mentioned below to resolve the same:
1. Click Start, All Programs, Windows Update.
If the update engine is taking you to Microsoft Update, you should change it to Windows Update.
2. Click Change Settings option in the left pane
3. Uncheck “Use Microsoft Update”.
This should resolve the issue. If the problem persists, perform the steps mentioned in the following KB articles:
http://support.microsoft.com/default.aspx/kb/934562/en-us
http://support.microsoft.com/kb/918355
Also, you can manually download and install the Windows Defender definitions. Visit the following link and download 32-bit or 64-bit based on the version of your Windows Operating system:
http://www.microsoft.com/security/portal/ADL.aspx
Incase of any problems with downloading the definition, or running the program due to severe virus/malware attach, perform a PC safety scan. Visit:
http://onecare.live.com/site/en-us/default.htm
This will remove any Virus, Malware, or spyware from the system and allows you to continue with your task.
Windows Defender says “Service has stopped” when the application is launched:
If you are using a third party spyware/malware program, it may disable the Windows Defender service. To start the Windows Defender service again, perform the following:
1. Click Start, Type Run. (You can also use Win Key + R)
2. Type services.msc
3. Right-click Windows Defender service and Click Start.
To Stop the Windows Defender application, you can follow the same steps, and Stop it.
However, if you don’t want to use the program at all, change the Startup type to “Manual” from the Services Properties. Right-click Windows Defender, and click Properties to see the option.
Windows Defender is taking long time to perform a full scan:
This issue happens due to temporary Internet files, cookies, and other applog files. To resolve this issue, it is recommended to remove all these files before you schedule a full scan.
Also, update the definition pack before you perform a full scan to remove the latest spyware.
Reporting Spyware information to Microsoft:
You can report the identity of any spyware to Microsoft. Check the following link for more information:
http://www.microsoft.com/athome/security/spyware/software/support/reportspyware.mspx
Optimizing Microsoft Windows Vista Performance May 8, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Windows Vista.3 comments
This post discusses the most common causes of slow performance and how to troubleshoot those issues.
There are several tasks you can perform when using Vista to improve slow computer performance. Vista contains built-in-features that allow you to manage potential slow performance issues. These incude:
- Deleting programs you never use
- Limiting how many programs load at startup
- Running fewer programs at the same time
- Turning off visual effects
- Restarting regularly
- Checking for viruses and spyware
- Checking your computer’s speed
- Disabling services you don’t need
To learn more about these features, please refer to Windows Support and click to : Optimize Windows Vista for better performance.
The left pane of Performance Information and Tools includes tasks that can help you improve your computer’s performance. For more information on using these tasks, please refer to Windows Help Article: “Ways to improve your computer’s performance“ .
There are several tasks you can perform to maximize already good performance. These incude:
- Ensuring that you have adequate RAM
- Ensuring that you have an adequate virtual-memory configuration
- Using ReadyBoost
- Managing startup programs
- Keeping your disks defragmented
- Maintaining adequate free space on your disks
- Avoiding tweaks of dubious value
For specific information about how to maximize Windows Vista’s performance, please refer to Windows Help Article: “Get maximum performance from Windows Vista“ .
Microsoft Windows Vista contains a built-in-diagnostics feature that assists in managing potential slow performance issues. To learn more about it, refer to Microsoft’s “Built-in Diagnostics“ page.
How Do You Remove Conficker Worm Files? April 29, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Software Issue, Virus, Windows Vista, Windows XP.2 comments
Need Virus Removal help to figuring out how to delete Conficker Worm files? While there’s some risk concerned, and you should only manually remove Conficker Worm files if you’re comfortable editing your system, you’ll find it’s fairly easy to delete Conficker Worm files in Windows.
How to delete Conficker Worm files in Windows XP and Vista:
1. Click your Windows Start menu, and then click “Search.”
2. A speech bubble will pop up asking you, “What do you want to search for?” Click “All files and folders.”
Conficker Worm Removal Tips
3. Type a Conficker Worm file in the search box, and select “Local Hard Drives.”
4. Click “Search.” Once the file is found, delete it.
How to stop Conficker Worm processes:
1. Click the Start menu, select Run.
2. Type taskmgr.exe into the the Run command box, and click “OK.” You can also launch the Task Manager by pressing keys CTRL + Shift + ESC.
3. Click Processes tab, and find Conficker Worm processes.
4. Once you’ve found the Conficker Worm processes, right-click them and select “End Process” to kill Conficker Worm.
Troubleshoot performance issues in Windows Vista April 24, 2009
Posted by computerhelpandsupport in Computer Help, Operating System, Windows Vista.add a comment
This post provide Windows Vista support to fix performance issue in windows Vista operating system. Performance issues that you may encounter on a Windows Vista based computer may include but are not limited to the following issues:
- Applications may take a long time to start, or applications may perform slower than expected.
- You may notice your computer has a consistently high hard disk usage or CPU usage.
- Sound and video may appear choppy.
- Performance decreases when you run certain applications or games.
- Applications may become unresponsive.
- Windows Aero may become disabled.
- Windows Vista may take a long time to shut down.
Before you start to troubleshoot any performance-related issue, it is important first to set correct expectations. If you installed Windows Vista on a computer that only meets the minimum hardware requirements, but the computer does not meet the recommended hardware requirements, you may be unable to make a noticeable improvement to the Windows Vista’s performance unless you upgrade the hardware on the computer, or you disable some features of Windows Vista. These features might include the search indexer or some visual effects.
For more Use the following
Install standard VGA compatible driver
system Requirment for Vista
Windows Vista Updates
